70 Electromechanical (Fail
Safe)
 • Power off, unlocks outside lever
• Deadlocking latch
• Key retracts latch
• Inside lever always allows egress
• Voltage requirements: 12VDC or 24VDC
Regulated; voltage must be specified when ordering
• Provided with ElectroLynx™ 8 Pin Connector
• ElectroLynx™ Hinge for 10G70 is a McKinney QC2
71 Electromechanical (Fail Secure)
 • Power off, locks
outside lever
• Deadlocking latch
• Key retracts latch
• Inside lever always allows egress
• Voltage requirements: 12VDC or 24VDC
Regulated; voltage must be specified when ordering
• Provided with ElectroLynx™ 8 Pin Connector
• ElectroLynx™ Hinge for 10G70 is a McKinney QC2
RX- Monitoring of Inside Lever
 • RX- monitors inside lever rotation
• Incorporates into alarm systems or in
conjunction with an electromagnet
• Available Functions: 04,05,15,37,70 &71
• Lever only rotates in one direction
• Must specify Hand (RH, LH, RHRB & LHRB)
• Internal switch offers both N/O & N/C
• Provided with ElectroLynx™ 8 Pin Connector
• ElectroLynx™ Hinge for 54- is a
McKinney QC6
Concealed Circuit Hinge
SARGENT recommends using a 2-wire, 5 knuckle with quick
connect continuous circuit hinge for running electricity
from your power supply to the electromechanical bored-in
lock.
 • 1 amp capacity - low voltage 24V
• Full mortise
• Wires contained within hinge - invisible and tamperproof |
|
ElectroLynx™ - Hardwiring Made Easy!
 As part of their promise to provide innovative, fast
and effective, and higher security solutions to their
customers, ASSA ABLOY Group companies offer ElectroLynx,
a universal quick-connect system that simplifies the
electrification of the door opening. ElectroLynx™ is
a trademark of ASSA ABLOY, Inc.
Power Supplies
A 12VDC or 24VDC regulated SARGENT power supply is
recommended to power your electromechanical bored lock.
Choose from the list below. (All units have externally
mounted Red LED showing active 120VAC being supplied
to the power supply)
NOTE: To determine the correct power supply, total
component
loads must be considered.
3520 and 3521 Power Supplies
• 3520: 24VDC, 1.0 AMP filtered and regulated power
supply
3521: 12VDC, 1.0 AMP filtered and regulated power supply
• UL Listed for Class II applications
• Size: 9-1/4"W x 12-1/4"H x 4-1/8"D
• Single non-switched output
• Available with battery backup--specify 738 suffix
3540 and 3541 Power Supplies
• 3540: 24VDC, 2 AMP filtered and regulated power supply
3541: 12VDC, 3 AMP filtered and regulated power supply
• Supplies power for maximum of 6 locks (given 0.25A/lock)
• UL Listed for Class II applications
• Size: 14-1/4"W x 14-1/4"H x 4-1/8"D
• (4) switched outputs, each individually controlled
• Available with Battery backup--specify 738 suffix
3570 and 3571 Power Supplies
• 3570: 24VDC, 6.0 AMP filtered and regulated power
supply
3571: 12VDC, 6.0 AMP filtered and regulated power supply
• UL Listed for Class II applications
• Size: 14-1/4"W x 14-1/4"H x 4-1/8"D
• (8) switched outputs, each individually controlled
• Available with Battery backup--specify 738 suffix
|
